Hello,
We have a cube with compressed packages and uncompressed. There are several DSOs that are the source data. We need to delete and reload the uncompressed packages from a process chain. The mechanism needs to work similar to selecting the uncompressed packages and deleting to allow a subsequent delta to reload the deleted data. BW is version 7.0.
Something like this:
Any thoughts or suggestions would be appreciated.
Thank you.
Hi experts,
I want to find out list of transformations which has start routines and code present inside the strart routines.
Please help me..Thanks in advance.
Hi Experts,
I have come across an error in DEV system while executing the process chain where the process chain has got failed in DTP execcution,its showing the error message as follows:
Dump: Internal session terminated with a runtime error DBIF_RSQL_SQL_ERROR(see st22)
I read some of the posts in SCN and there i founfdit like this error will be rectified if we post the data pakages manually again.
My process chains are being executed through ALEREMOTE( Host ).
Could you please explain me that how can i manually repost the datapackets and how to reschedule the process chain ?
It would be better if you suggest me if you have any other sollution.
Thanks In advance,
Arun.
On job in the source system is failing with an error "No memory available to extend the index of an internal table.". And the Runtime Error is "TSV_LIN_ALLOC_FAILED". The basis team is not ready to extend the memory. Due to this job failure a infopackage in BW system is also failing.
How can I possibly resolve the issue from BW system itself.
Hi Experts,
We are facing this issue recently where, the hierarchy save for R/3 data source is failing with the error "No InfoProvider exists with name xxx".
We are doing a full load from data source, whereas the data source is not in A version in source system also, in BW the same is in "modified" version. This load happens daily and we don't find this issue always but rarely.
Please spare some of your time in throwing a light at this topic. Please feel free to ask for the necessary information.
Regards,
Bala S
Hi,
I am a newbie working with AAK Tool.
We need to develop an AddOn Insatallation(AOI) package through the same.
For the above objective we worked with ECD System(Clnt 100) as Development System and used ECD System(Clnt 200) as the Consolidation System.Are we correct with the above landscape?
We made the delivery in CLNT 200 and have the package ready for Transport.However ,the namespace Transport Request is not made a part of the Change Piece List.Do we need to add it before deploying the package or it can be done without it?
Moreover while checking the the namespace details in ECD(100) I've found that repair liscence key is not maintained.Is it mandatory to maintain it because when i tried creating the delivery by adding the namespace TR in the change piece list it displayed a liscence key warning and the package creation was stopped.So I recreated the package with the namespace TR removed.
Need to deploy it ASAP.Any help would be deeply appreciated.Reply awaited.
Thanks
VB
Hi,
When we are trying to display the data from a change log table its giving short dump"Syntax Error".
We are able to see the data inQuality system. In Production sys we are getting this error.
Please help us in fixing this.
Thanks,
Jyothi.
Hello,
For BI landscape, we have configured DEV/QA systems in MCOD, they share the same database but have a different schema database name.
(this is not the case for UAT/PROD we have differents database, but with same name of schema)
When we transport DS/DSO, we have error, the change does not happen as it is not seen in the QA schema.
We have to create a transport in QA system, we have to force the change of the schema manually on the BI object (DSO).
How could it solve it ? by creating a direct DB connect for QA system ?
help will be grateful , thanks !
Thomas
Hi All,
When I moved the Bex reports from DEV environment to QA environment, may I know the enterprise ID of each query element in DEV and QA environment will be same or different?
Thanks,
Avadhoot Nayakal
hi
Can anyone please tell me variable represents constant at bex
hello
I install 0fi_gl_10 from ni conent but there are n't infopakage for it,I created Info pakage and start it.
In target of info Pakage is 0figl_c10 ,that it is ODS, PSA is fill but ODS dosn't fil!!!!!!!!
how to sove it?
Hi Gurus,
I am getting the below short dump error when i extract the DS from ECC.
Please help how to overcome this.
Thanks in advance.
RajeshR
-------------------------------------------------------------------------------------------------------------------------------------------
Runtime Errors SYNTAX_ERROR
Date and Time 23.05.2014 17:12:25
Short text
Syntax error in program "SAPLXRSA ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSAP" had to be terminated because
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLXRSA " in in
" in
line 6:
""S001BIWS" must be a flat structure. You cannot use internal ta
"trings, references, or structures as components. ."
" "
" "
The include has been created and last changed by:
Created by: "SCHELLM "
Last changed by: "PUTZ "
Error in the ABAP Application Program
The current ABAP program "SAPLRSAP" had to be terminated because
come across a statement that unfortunately cannot be executed.
Hello,
I want to load Non-ledger data to BW, unfortunately 0FI_GL_14 extractor can support Leading ledger (0L) data only.
After going through the SAP documentation, I came to know that SAP has given standard procedure to generate extractor which can support Non-leading ledger data.
In that process I launched FAGLBW03. tcode to generate data source.
When I select Line item data source for NL it is throwing following error message.
Extractors for general ledger documents yet supported
Santhosh
Hi,
Can any one explain on what are all the objects will not be useful if we gone for upgrade from BI 7.1 to BI 7.3.
Regards,
j.Sakthikumar
Hi all,
I am new to sap BW. When I tried to delete DTP request from cube which is in red state it is throwing an ABAP dump error.
Please help me how to delete the request.
Regards
Dinesh
Hi All,
I am facing a problem where the comments are getting populated against a parent node which I don't want. The comments should get populated against the cost center group only and not against it's parents. My current BW reports' screen shot is as below. You will also find the ECC report's screen shot.
Hello Friends
I have one DSO which is having 2 Characteristics ( “TRUCK_NO” , “TRIP_NO”) I will call It DSO1
I have another DSO which is having 3 Characteristics (( “TRUCK_NO” , “TRIP_NO” and “TRUCK_DATE”) Iwill call it DSO2
My requirement is, I want to read the DSO2 by using “TRUCK_NO” and “TRIP_NO” and write the TRUCK_DATE” into the DSO1.
Can anyone help me with writing ROUTINE for above scenario?
Thanks
Kumar
Hi All,
We have text load full infopackage present in a process chain. Duration of the load in process chain takes 7 min to finish(completely turning the status to green)
But when I checked the corresponding job in SM37 in ECC side, it finishes less than a minute.
I don't know where the remaining 6 min are taking at infopack. In the process monitor of infopackge, the status is yellow starting from extraction steps. PFA the snap shot of it.
Today only this issue occurs ,yesterday the info pack load completes less than a min.
Can you please help me
Regards
Pradeep
Hi Experts,
We are facing a Syntax Error Issue for all the Data Sources in RSA3.
The Error is stated below:
Error in the ABAP Application Program
The current ABAP program "SAPLRSAP" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
In include "ZZ_0DPM_0 ", in line 21 of program
"SAPLXRSA ", the following syntax errors
have occurred:
Field "GT_/RAD/HIST_HDR" is unknown. It is neither in one of the speci
fied tables nor defined by a "DATA" statement. "DATA" statement.
Please guide us to get through this Issue.
Regards
Pankaj
Hello,
I created following structure which I want to use in a datasource. It consists of five fields and an include that includes structure STPOX.
Then I went to RSO2 to create a datasource using this structure (ZBW_S_BOM_STPOX). But when I try to save the datasource I get the error message "Units field ROAME for field ROANZ of DataSource XXX is hidden". The datasource is not saved so it does not exist, so I cannot go through RSA6 to unhide the field.
ROANZ (Number of variable-size items) is a field in structure STPOX referencing to field RC29P-ROAME.
I've checked the forums and a solution was suggested by adding the field ROAME to extract structure ZBW_S_BOM_STPOX and change the reference fields of ROANZ to ZBW_S_BOM_STPOX-ROAME. However changing the reference or ROANZ means changing it in stucture STPOX which I don't want. Any suggestions besides adding all fields of STPOX to my structure manually?
Kind regards,
Alexander Oertel