Hi,
Is there a role in BW that allows the user to have access only to display transactions?
thanks
↧
Create a display role SAP BW
↧
Error while activating DSO
Please give me some solutions for the following DSO activation error. Find the attached image file below.
regards
ranendra
↧
↧
Enhance 0HR_PA_0 or 0HR_PA_1 with the field HRP1007-VACAN
Hi BI Experts,
Can anyone help me understand the relationship between the data sources 0HR_PA_0 or 0HR_PA_1 and the field HRP1007-VACAN? In other words, I need the way to enhance the VACAN field in any of the 2 datasources.
Thanks
Saurav
↧
Metadata replication popup when installing BI content in 7.4
When I select an object to install with grouping "Data Flow Before", I am constantly presented with the attached window, which I either have to cancel or accept, during the object collection process. This occurs multiple times (up to 20, 30, or more) depending on the complexity of the data flow of the object, regardless of whether I accept, cancel, or accept with different options. My guess is that I'm being prompted for each DataSource that is encountered in the collection process, but the window only indicates the source system. Is there some setting or note I need to apply so that I can just accept once - it is making the content installation process take a lot longer than I had expected. Just to emphasize, this is on the object collection step and not the actual installation.
I am on BW 7.4 SP7 with BI Content 757 installed. I have replicated all datasources from my ECC source system (content and active).
Any tips or suggestions are appreciated.
↧
Data was not sync with RSA3 vs PSA
Hi
I'm getting some data issue in PSA when i compare with PSA.
Eg
RSA3
PERNR SD ED BPLAN COST EE PROVIDER COST
1234 01/01/2011 12/31/2012 1000 $200 $45
4567 01/01/2012 12/31/9999 1400 $100 $60
1122 01/01/2011 12/31/2102 1000 $200 $40
2197 01/01/2011 12/31/2102 1000 $200 $40
1133 01/01/2011 12/31/2102 1200 $100 $40
PSA
PERNR SD ED BPLAN COST EE PROVIDER COST
1234 01/01/2011 12/31/2012 1000 $400 $55
4567 01/01/2012 12/31/9999 1400 $100 $60
1122 01/01/2011 12/31/2102 1000 - -
2197 01/01/2011 12/31/2102 1000 $200 $10
1133 01/01/2011 12/31/2102 1200 - -
My issues is some of the perner i'm getting perfect data and some are coming invalid cost and null values .I could not able to trace out .Its was custom extractor and version NW 7.0 and refer note 529789 nothing work out.
can some give me clue what cause these issue.
↧
↧
DSO and Informatica
Hello All,
We are facing a situation, we need to extract data from SAP BW DSO and load it to Teradata using ETL : informatica,
The extraction is very slow and it is taking 3-4 hrs for 1 mil records.
Request you to please let me know what all checks can I do to find the bottleneck and what kind performace improvement I should think of doing.
Are there any specific performance settings for Informaica pull from BW DSO ?
↧
Copying the 0Fi_GL_12 Extractor
Hello Gurus,
We have a requirement to make copy of the 0FI_GL_12 extractor. So we tried to copy the extractor by creating custom extractor YFI_GL_12_FR in RSO2, with the same extract structure FAGL_EXTSTRUCT_LEAD. We used a custom program to update ROOSOURCE table value to enable delta queue based delta for the extractor.
We have copied the Function group of the FM FAGL_GET_TT_DATA_LEAD and updated the FM ZFAGL_GET_TT_DATA_LEAD in the custom extractor but while executing the Extractor in RSA3 transaction, we are getting error occured during extraction error.
Please help in understanding the ways of copying a standard function module for our custom extraction.
Let me know for any clarifications.
Thanks and Regards,
Raghu
↧
Data missing in Cube
hello experts,
we have a material and it s having some material doc numbers. all doc numbers are there in DSO(Standard). But in cube 3 doc numbers are missing for this material. No routines....flow is frm 2lis_03_bf-->dso-->cube-->query.
So what is wrong with cube...??
regards,
Raki
↧
Technical content Related
Hi, I have a DSO which has queries built on it. I want to use technical content to find out when was the last time when those queries got executed and used and which user id used it. which content should i look at?
Thanks.
↧
↧
Load data from BW to ERP using open hub
Hello @ all,
we like to push data from SAP BW to SAP ERP (ztable). What is the best approach to do this? We are trying to use open hub (BW 7.01) but the question is what destination type is SAP ERP?
Is it 3rd Party? And how can we generate the table in ERP?
Thanks
Stephan
↧
use of infosource in SAP BI 7.0
hi friends,
I am little bit confuse about the use of infosource[in rsa1],because without using it we can perform extraction.
Therefore I want to know what would be the exact scenario where it is used in BI 7.0
thanks,
ravi
↧
Question about table RSPCLOGCHAIN
Hi guys,
How much time is necessary for table RSPCLOGCHAIN to be filed when a process chain is finished.
Fyi, mu process chain is in a meta chain.
Thanks.
Amine
↧
PSA data not loading to cube (0PABN_C01)
Greetings,
We are installing Benefits business content and are testing in our DEV environment.
The first step was to hard coded 0CALMONTH to do an initial load of previous months data and it loaded to the cube correctly.
The second step was to use an OLAP variable to only load the current month (the idea is to reload the current month repeatedly as new test data is created or changed). The PSA runs but will not load the data to the CUBE, I get the following message:
Loaded data is not yet visible in Reporting (see long text)
Long text:
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000325467, number REQU_4ZUFLG95WXU7LDCNLK1FAEKUG.
Procedure
Choose Refresh to remove the inconsistency.
I tried creating an ABAP routine and get the same issue. If I try to update with a scheduler it displays a scheduler (PSA Subsequent Update) but will not let me select a Data Target.
Any help would be appreciated!
Bill
↧
↧
Stock Value Wrong
Hello All,
I have a problem concerning stock (quantity and values).
In our Source System, one material is displayed by quantity and value (transaction MM03 or CKM3), both are correct.
When we're consulting this same material through a query, the quantity and value are wrong. For same cases the quantity is correct.
Please, take a look (the quantity is correct, but the stock value doesn't):
Another important detail is that the movement type "Output" (negative/red) is recorded in the values, but the movement type "Entry" (positive/blue) doesn't:
Here's the technical fields/names in SAP for each one in the way that refers to the query:
Quantity = AABCK0074
Value = AABCK0075
Plant/Center = 0PLANT
Storage Location = 0STOR_LOC
Someone could help?
Thanks in advance,
Flávio
↧
Single infoobject ACR running for a long time
Hello
I have a single infoobject "Contract account" which has several dependent attributes. We update our data weekly and it in turn updates our master data.
When I run the ACR for contract account, it runs for a long long time (atleast 7-8 hours). And most of the time it fails due to the following error:-
All other ACRs and dependant chains fail in the meantime.
When we repeat the step the next day, it completes in few minutes. The immediate solution is PSATEMP tablespace increase.
Also, I have checked that the infocubes and its aggregates indexes, DB Stats are degenerated. Which can be rectified, but that is more for the aggregate performance.
I have also thought to change the RCUSTV8 delta limit percentage. But these are not solid enough solutions to avoid ORA-12801 error.
Is PSATEMP tablespace increase the only solution? Is it possible to schedule the ACR in such a way that it can be split per aggregate in steps?
↧
Delta Pointer
Hello experts.
i know that delta pointer is helpful to fetch the data from start of delta pointer to the end of datasource
but, my question is, in delta upload, how can we use delta pointer to fetch the modified records from datasource ( since delta load means loading the new data as well as the data which has been modified in the datasource)
please provide the complete picture of usage of delta pointer, if possible with an example?
thanks.
chakradhar.m
↧
How to use RSPCM with background user
Now that RSPCM is user-specific (since BW 7.3) we have an issue on how to setup notification.
Our notification job is setup to run as a non-dialog user, which is a fairly common practice as far as I know for periodic jobs.
Unfortunately, the monitoring program looks for the user-dependent list of chains associated with that background user, not some global list (these are stored in table RSPC_MONITOR).
And, since we can't log in as the background user we can't maintain the process chain list associated with that user, and we can't select an include.
So when we add a new process chain and want it to be monitored we have no way to do this!
It seems to me that by making RSPCM user-dependent SAP has broken the basic functionality.
Do you have any suggestions on how to maintain a global list so that the monitoring job that is running as a background user will pick up all the process chains we want it to?
↧
↧
Can i go with single dso?
i have to get data from Extractor 0fi_gl_14 for Keyfigures A,B,C
and from Extractor 0FI_TX_4 for keyfiguresE,F,H
I have common info objects as Account document no and G/L aCCOUNTS in both extractors .
can i simply connect both datasources to one DSO and Then to cube and creat Bex Report?
or i need to creat separte dso for each?
Regards,
Naiduz
↧
Request/task does not exist. Bex transport request is not available or not suitable
Hi All,
I created the Bex query in BW DEV system and trying to move it BW QA system I followed the below steps:
1) RSA1->Transport Connection
2) Selected a query. Dragged it to right hand side.
3) Clicked on Bex (truck) button. Clicked on Assign/Delete button
4) Created a new transport request. Assigned the package.
5) And finally clicked on Truck button
after doing this, I tried saving the changes in Bex report in designer, but changes are not getting reflected. And even when I am tried capturing the query in transport request, then i could see only one object i.e. report's ID nothing else.
Please provide the solution so that I can do changes in the report and move it to quality.
↧
Package $EQ_GEN does not exist, or more authorizations are required
HI All,
After the upgrade to 7.31 I am facing the issue with transports, which contain BEX Query elements:
"Package $EQ_GEN does not exist, or more authorizations are required"
I cannot find any info about the package $EQ_GEN.
Do you have any idea where to look for it to fix it?
Best
Radek
↧