Hi Experts,
Would there be anyone here who can suggest on what are the related BI Content in SAP ISU?
Thank you!
-TM
↧
SAP ISU - BI Content
↧
Read from Composite Provider with ABAP
Hello Colleagues,
does anyone know how to read data from a Composite Provider by any ABAP Class or FM or whatever? The classic FM "RSDRI_INFOPROV_READ" for instance does not work. Further functions like FM for reading data alternativly by using a query are also outdated as they don't recognize the "@3...." at the beginning the "Infoproviders' Name".
Any help is kindly appreciated.
Saludos,
Yavuz
↧
↧
Not able to extract the data from MDM to BW
Hello Experts,
I have searched this topic in SCN and didn't find any related info hence I am posting this.Your help much appreciated.
While extracting the data from data source (MDM system) to BW, it's failing daily with the below error message and other data sources are extracting the data successfully. I have repeated twice but not helped much. I learned that when repository is down it happens and next run will be fine but it's third day continuously failing. I am not much familiar with the MDM & repository.
Regards,
Prakash
↧
Increasing the length of Characteristic Object in SAP BW 7.4
Hi Friends
We are on SAP BW 7.4 version..
As part of enhancement we are supposed to increase the length of "Characteristic Infoobject" from 60 to higher value
1)while increasing we see Routine Conversion issue which is "ALPHA", If we remove and perform this activity then it is successful
But could any one share your experiences regarding issues that can be faced if we use this method
2)Another method is Master data deletion in ODS,Cubes,Infobject
If we perform this option could any share what can be the issues while reloading
Regards
Bose
↧
Bex Query : calculate CKF per record
Hi
i have a requirement to show sicknes cost. Now this calculation has to be sickness hours * Hourly Rate for each employee. I created CKF for this in the bex. the bex is multiplying the total number of hours for all employess into total hourly rate which is wrong.
for e.g
employee Hourly Rate Sickness hours
1 10 5
2 20 10
total sickness cost should be (10*5) + (20*10) = 250
whereas the query is currently doing 30 * 15 = 450.
Any idea what can i do.
Thanks
↧
↧
Deleting Hierarchy Requests from DTP?
I have few DTP requests that failed to load Hierarchies into a Info Object.
How can I delete that particular request before loading again.
We have Manage option for Attribute and Text to change the QM Status of the requests.
But for Hierarchy on Right Click we have no option to Manage the requests.
↧
BEx Application error "CX_SY_OPEN_SQL_DB" occurred while running a report
Hi,
We are getting an error "CX_SY_OPEN_SQL_DB" while running a BW report. We are using web template for running the Bex query. PFA the screenshot for reference.
Regards,
Abhi
↧
70 million Entries in DSO , new field to add
i have over 70 million entries in my current DSO with Deltas in process everyday , Material movements.
i have a request to add a new field to the DSO and get its historical values that are currently available in PSA via the standard extractor 2lis_03_bf
whats the best way to get this done? will i lose data after remodeling the DSO
↧
Adding new DTP process into Existing Process Chain
Hi People,
I have one PC which gets data from ECC to BW DSO target in Production and it is running since from long.
Now I have developed Info cube so I wanted add new DTP process which gets data from DSO to Infocube.
Is it possible add another DTP in to already running PC? If yes do i need to take care anything?
Regards,
Vishu
↧
↧
updating date in input ready query.
Hi,
In IP(Integrating Planning) , through 'Input ready query' whenever I am updating any field, along with it I also want to capture and store this date and time of update into the real-time infocube.
Kindly advise , if this can be achieved., if yes, then how?
Regards
Deblina
↧
BW report in Arabic
Hi Gurus,
I am recently working for a middle east client. They wish to see the SAP BW reports in Arabic.
I think we can achieve it through "translation setting" and "Unicode" setting. But I don't have any idea on both. Please help with your inputs.
Also note we have only one ECC system and it is in EHP6, we have to pull data from ECC to BW. We have SAP BW 7.3.
Thanks.
↧
Can SUM option "Standard" be used for BW?
Hi gurus, Can the SUM option "Standard" (downtime-minimized) be used with a BW system? Note 851449 - "Changeability of BW objects during the upgrade" isn't clear to me. Will BW data loads and reports still work as usual during the downtime? Is this note a warning that Single System mode must be used?
Warm Regards, CM
↧
WAD report button
Hi All
I have 2 WAD reports called 'spend analysis' and 'spend main'.
would like to add one button to report 'spend analysis, if we click it will open second report to perform some actions.
So some one please advise me that which Button command will work to perform above action.
thanks
Bhaskar
↧
↧
Setup table filling
Hi Experts,
I have a question with regards to setup tables fill up for 2LIS_03_UM.
-Initially deltas from 2014 have been setup for 2LIS_03_BF's and data has been loaded to a Custom-DSO. Later data from 2004-2013 has also been loaded to the custom DSO. Now 2004-2013 data should be loaded to 0IC_C03 from DSO for BF data.
-2LIS_03_UM deltas from 2014 have been setup. Now I need to fill setup tables for data from 2004-2013. I'm going to fill the setup tables using Company code, fiscal year fields. This data should be loaded to 0IC_C03. Inorder to do this, as a first step I have deleted the setup tables for app.component 03 using LBWG as I found 20 records in setup tables related to 2LIS_03_BF.
As a second step, I am trying to fill up the setup tables for 2LIS_03_UM. However I am getting them message that "DATASOURCE 2LIS_03_BF HAS STILL DATA TO BE TRANSFERRED". I couldn't proceed further.
So, my questions here are
1. Do I have to request ECC downtime in order to fill the setup tables. (Remember, I only intend to fill up for 2LIS-03-UM.)
2. "DATASOURCE 2LIS_03_BF HAS STILL DATA TO BE TRANSFERRED" is the message I have been receiving while trying to fill up for 2lis_03_um. What does this mean? Is this somehow related to unprocessed requests in SM13. Or is this being encountered as the deltas are running(daily twice) and they are queued up.
Please suggest me what needs to be done here ASAP, If possible.
Thanks,
Sandeep
↧
delta extraction in bi
hello
I know how to delta extract in sap,I know how to use delta in rso2,but I have a question...
for using delta I must use timestap or numeric or .... in table or structure , But if in table there aren't any field for date or timestamp,how to do?
I must add date field to each standard table that use for bi ?
plz help me
↧
Data Missing after DSO activation
Hi all,
I have a standard DSO Zfigl_o10. I have loaded data into DSO and checked data in New table for 4 info objects(chars), and the data is available.
When I activated the DSO and checked again the data is not available for the 4 info objects(chars).
I have already loaded the master data for the 4 info objects and checked in the master tables(especially in SID tables) and there's no problem with the data.
All the four Info objects are standard EX: 0Country,0profit center,0pcompany and 0move_type.
I have checked in the source also, I mean Iam pulling the data from another DSO and the issue is same with that as well.
Please let me know if needed any more info...
Thanks.....
↧
Standard Datasource
Hello, I am looking for a single datasource to pull data from
ANLA
ANLB
ANLC
tables. I don't want to create a standard datasource. I see there is 0ASSET_ATTR datasource but I don't think data is coming from any of these tables. Also, i am not able to find any standard datasources link on help.sap.com. Might they changed their website.
Please let me know,
Thanks.
↧
↧
Bex Query : calculate CKF per record
Hi
i have a requirement to show sicknes cost. Now this calculation has to be sickness hours * Hourly Rate for each employee. I created CKF for this in the bex. the bex is multiplying the total number of hours for all employess into total hourly rate which is wrong.
for e.g
employee Hourly Rate Sickness hours
1 10 5
2 20 10
total sickness cost should be (10*5) + (20*10) = 250
whereas the query is currently doing 30 * 15 = 450.
Any idea what can i do.
Thanks
↧
Warnings have occurred (see log) Message No. R8281
Hello Team,
I have activated my customized Transnational Data source in RSA6 and always I get "Warnings have occurred (see log) Message No. R8281".
I can check the data in rsa3, my concern is during transporting it will create a problem or we can ignore? I have see lot of blogs about same but not answered for this problem.
↧
Info Object data deletion Runtime error - IWP_DELETE_IOBJ_DATA_BY_ATTR
Hello,
BI Info objects data deletion using function module - IWP_DELETE_IOBJ_DATA_BY_ATTR, returns runntime time error.
If the Info object have Componding object - FM returns runtime error. Object does't have Compunding object FM object data deletion step wrking fine.
Note: System newly migrated BI7.0 to BI7.4(HANA). Function moduled worked fine in BI7.0 version.
PFA screenshot the line - 1240 (Retruns DUMP), please help on this.
Thanks & Regards,
Suresh M
↧